THE ENGINE SAVER® LAND ROVER PAGE
WE ARE PLEASED TO ANNOUNCE THE RELEASE OF OUR ALL NEW KITS FOR LAND ROVER VEHICLES
THESE KITS HAVE BEEN DESIGNED FOR VEHICLES WITH Td5, Td4 puma, 200Tdi, 300Tdi AND V8 ENGINES
THEY HAVE SCREW IN SENSOR PROBES WHICH REPLACE EXISTING BLANKING PLUGS IN THE COOLING SYSTEM
SO FITTING IS VERY SIMPLE.
NO DRILLING HOLES, NO CUTTING HOSES, NO SOLDERING THREADED BOSSES INTO RADIATORS
A NEW KIT FOR THE SERIES 1 & 11 V8 ENGINES WITH THE ALUMINIUM RADIATORS IS NOW AVAILABLE ALSO
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
THESE NEW KITS HAVE BEEN DEVELOPED AFTER EXTENSIVE CONSULTATION AND PROTOTYPE TESTING
BY THE LAND ROVER COMMUNITY, INCLUDING DEALERS, WORKSHOPS AND THE AULRO WEBSITE MEMBERS
SPECIAL THANKS ARE DUE TO ANDREW WOOD, GREG GREEN, BRUCE ROBERTS, MATTHEW BORDIGNON, DWAYNE FROM MR. AUTOMOTIVE AND CARL FROM GREEN LIGHT AUTOMOTIVE
FOR THEIR INVALUABLE INPUT INTO THE DEVELOPMENT OF THESE KITS
MORE THANKS ARE DUE TO ANDREW KITCHIN AND PETER KITCHIN FROM REDLANDS 4WD CENTRE IN CAPALABA FOR INPUT AND TESTING OF THE NEW SERIES 11 V8 KIT.
AND OF COURSE TO HAYDN & GORDIE IN THE UK WHO MAKE THESE KITS POSSIBLE BY PRODUCING THE SENSORS FOR US FROM SPECIAL MATERIALS
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
THREE KITS COVER THE RANGE.
PLEASE CHECK THE PICTURES TO SELECT THE CORRECT SENSOR PLUG FOR YOUR VEHICLE
KIT ESS12TDV FOR Td5 ENGINED VEHICLES PLUS THE V8'S WITH THE
BLEED SCREW IN THE TOP RADIATOR HOSE ( NOT THE PLASTIC "T" PIECE )
THIS KIT CONTAINS:
A SCREW IN SENSOR TO REPLACE THE NYLON AIR BLEED SCREW IN THE TOP RADIATOR HOSE
THE ELECTRONIC CABIN MODULE WITH AUDIBLE ALARM AND LED WARNING LIGHT
SNAP IN BEZEL FOR THE WARNING LIGHT AND SURROUND STICKER
CABLE TIES
PRE-MADE CONNECTOR CABLE FROM THE MODULE TO THE SENSOR
FULL INSTALLATION INSTRUCTIONS
ORDER HERE
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
KIT ESSLR2 FOR 200Tdi, 300Tdi, AND SERIES 1 V8 ENGINES WITH COPPER RADIATORS
A SCREW IN SENSOR TO REPLACE THE PLUG IN THE TOP OF THE RADIATOR
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
KIT ESSLR3 FOR SERIES 1 AND 11 V8 ENGINES WITH THE BLEED PLUG IN THE PLASTIC "T" PIECE
IN THE TOP RADIATOR HOSE ASSEMBLY
THIS KIT ALSO FITS THE Td4 PUMA ENGINED DEFENDERS & SOME FREELANDERS
A SCREW IN SENSOR TO REPLACE THE PLUG IN THE TOP RADIATOR HOSE "T" PIECE
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
DEALER ENQUIRIES WELCOME
UK & EU CUSTOMERS PLEASE CONTACT HAYDN