THE HOLDEN COMMODORE PAGE
WE HAVE JUST RELEASED A BRAND NEW KIT FOR THE ECOTEC V6 COMMODORES VS to VY MODELS
THESE KITS HAVE BEEN ESPECIALLY DESIGNED FOR THE ECOTEC ENGINES
THEY HAVE SCREW IN SENSOR PROBES WHICH REPLACE THE BLEEDER PLUG IN THE THERMOSTAT HOUSING
SO FITTING IS VERY SIMPLE.
NO DRILLING HOLES IN RADIATOR TOP TANK, NO CUTTING HOSES, NO SOLDERING FITTINGS IN.
NO COOLANT IS LOST AT ALL DURING FITTING
THE PART NUMBER FOR THIS KIT IS ES VS-VY
ALL OTHER COMMODORES USUALLY USE KIT ESS1234/38
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------
ORIGINAL BLEED SCREW REMOVE BLEED SCREW REPLACE WITH COOLANT SENSOR
THE KIT CONTAINS:
A SCREW IN SENSOR TO REPLACE THE AIR BLEED SCREW IN THE THERMOSTAT HOUSING
THE ELECTRONIC CABIN MODULE WITH AUDIBLE ALARM AND LED WARNING LIGHT
SNAP IN BEZEL FOR THE WARNING LIGHT AND SURROUND STICKER
CABLE TIES
PRE-MADE HEAT SHEILDED CONNECTOR CABLE FROM THE MODULE TO THE SENSOR
FULL INSTALLATION INSTRUCTIONS
ORDER HERE
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
THESE NEW KITS HAVE BEEN DEVELOPED AFTER EXTENSIVE CONSULTATION AND PROTOTYPE TESTING
SPECIAL THANKS ARE DUE TO
MICHAEL SMITH OF INGHAM IN QUEENSLAND
RON & CARRIE AT CH SALES (OUR SOLE SALES AGENT IN WA)
FOR THEIR INVALUABLE INPUT INTO THE DEVELOPMENT OF THESE KITS